The best way forward is to undertake an initial engineering compliance inspection of the vehicle prior any major modifications are undertaken. Discussion of the clients requirements and needs. Inspection of the vehicle to determine the proposed upgrades and existing modifications that may require corrective measures. Depending on the scope of your modification this could include: Maximum axle weight loading (Front and Rear) of the vehicle Testing requirements depending the modifications may include, Low and high speed braking, lane change testing, emission testing, noise testing, ultra-sonic testing of welded components and test reports / CRN numbers / for modified components. Initial compliance report on the inspection findings including corrective measures and the statutory requirements for registration. Weighbridge certificate on completed modified vehicle including front and rear axle weights. Final engineering inspection. Issue of compliance certificate. Process at TFNSW.
Licensed Certifiers
Association Inc.
Licensed Certifiers
Association Inc.
Hi Team
Do you provide VSCCS certification for motorcycle/scooter enigne conversion to electric?
We have some motorcycles/scooters planned to do the conversion, but would like to get some professional ideas/ consultation prior to it.
Please contact if you can carry our the certification task for this project.
Thanks
Michael Zhang
Managding Director
Gogo Scooter Pty Ltd
Michael,
We would be happy to assist and provide you with VSCCS Compliance Engineering Support. As the Vice President of the Licensed Certifiers Association, it would be best to give me a quick ring to discuss.
Regards
John Oste
Vice President
Phone BH: 0439440203
E: johnoste@live.com.au
Mail: PO Box 94 Ingleburn NSW 1890
DISCLAIMER
The information presented in this document is intended for information exchange and guideline use only, and as a prompt to assist the recipients’ own research… This information is considered as being accurate as possible at the time of issue, however the information may contain errors, or may be subject to becoming out of date over time.
Recipients of this information are advised that the use of this material is at their own discretion and responsibility. The LCA disclaim any liability in connection with the use of this material. Any reliance you place on such material is therefore strictly at your own risk.
Hi
How much does it cost to get a VSCCS report for my van to register it as a camper van. Only interior change and 2 seats instead of 5. Tare weight increased.
Robbie,
We would be happy to assist and provide you with VSCCS Compliance Engineering Support. As the Vice President of the Licensed Certifiers Association, it would be best to give me a quick ring to discuss.
Regards
John Oste
Vice President
Phone BH: 0439440203
E: johnoste@live.com.au
Mail: PO Box 94 Ingleburn NSW 1890
DISCLAIMER
The information presented in this document is intended for information exchange and guideline use only, and as a prompt to assist the recipients’ own research… This information is considered as being accurate as possible at the time of issue, however the information may contain errors, or may be subject to becoming out of date over time.
Recipients of this information are advised that the use of this material is at their own discretion and responsibility. The LCA disclaim any liability in connection with the use of this material. Any reliance you place on such material is therefore strictly at your own risk.